51- Ribbons have a very low resistance that most amplifiers cannot drive directly.
52- Rich KKW "Wartribe" 7 string amplifiers and cabinets Throughout Slayer 's career, King has used mainly the same equipment.
53- Savage 120 Another seminal ENGL amplifier head, and the basis for the Ritchie Blackmore signature amplifier.
54- Since the sampling bridge converts the signal to a lower frequency, a low-bandwidth amplifier is used.
55- Sound deadening brands include Dynamat, Second Skin's Damplifier Pro, FatMat, and RAAMat.
56- Such sensitivity requires less amplifier power to achieve the same loudness.
57- Taken even further, some tube amplifiers are designed to have no negative feedback at all.
58- The 40-watt amplifier boasted two channels (NORMAL and BRIGHT).
59- The amplifier that is fed with these rails itself can be of any class.
60- The amplifiers or repeaters derive their power from the potential difference drop across them.
61- The audio output of the filter and amplifier is rectified and produces a DC voltage when noise is present.
62- The Auditorium also has an array of microphones, tape machines and amplifiers.
63- The band had damaged an amplifier on the way to the studio, so it buzzed when music was played.
64- The complete range would have four bridgeable amplifier channels and an integrated monitoring and control network.
65- The early 60s saw the introduction of the AA-100 integrated amplifier.
66- The early Fender "Tweed" and "Blackface" amplifiers are considered a good example of clean electric guitar tone.
67- The fluctuating voltage coupled out to a video amplifier can be used to reproduce the scene being imaged.
68- The membrane potential amplifier measures membrane voltage and sends output to the feedback amplifier.
69- The new guide contains its entire range of instruments and amplifiers along with color pictures and basic specifications.
70- The nickname "tweed" refers to the lacquered beige-light brown fabric covering used on these amplifiers.
71- The old style passive monitors required outboard power amplifiers to drive them as well as speaker wire to connect them.
72- The output of the preamplifier then goes to a separate amplifier system similar to that for an electric guitar.
73- The passive driver is not wired to an amplifier; instead, it moves in response to changing enclosure pressures.
74- The problem was in the low voltage circuit internal to the power amplifier.
75- The Sainton amplifier consists of a Class C main (or carrier) stage in parallel with a Class C auxiliary (or peak) stage.
Learning Games for Fun :
Here are some games designed for not only learning but also having fun. Enjoy it now!
