oxide layer in a sentence

1) Different oxide layers are developed during the sliding motion.

2) Proper thickness of the oxide layer is therefore critical.

3) Mechanical agitation is another possibility for disrupting the oxide layer .

oxide layer example sentences

4) Gold can be colored by creating surface oxide layers .

5) Applying a voltage through a safety resistor repairs the oxide layers .

6) This oxide layer must be removed for welding to occur.

7) The anodizing process creates a thin oxide layer .

8) In 2004 TVI began operations to mine the oxide layer .

9) This oxide layer forms on pewter and other tin alloys.

10) During anodization, an oxide layer is formed on the aluminium.

11) During the reaction silicon reacts with oxidants to form silicon oxide layers .

12) The bond strength is highly dependent on the oxide layer thickness and character.

13) On exposure to air, aluminium will immediately form a stable oxide layer .

14) Also unlike copper, aluminium forms an insulating oxide layer on the surface.

15) These modules do not require the presence of a transparent conducting oxide layer .

%ad2%

16) Too thin oxide layer looks light, up to the color of metallic copper.

17) When exposed to air at normal temperatures, it forms a thin oxide layer .

18) The material is composed of cobalt oxide layers in which the lithium is intercalated.

19) In other words, water is essential to repair the holes in the oxide layer .

20) It has good corrosion resistance in air on account of forming a thin protective oxide layer .

21) In this case the formation of a protective oxide layer is used to prevent further oxidation.

22) In this period the dielectric oxide layer can self-repair weaknesses by building up new layers.

23) The iron oxide layer , unlike rust, also protects the steel from corrosion through passivation.

24) Furthermore, it is corrosion resistant, exhibits superconductivity properties, and forms dielectric oxide layers .

25) A thin insulating oxide layer on either side of the fin separates it from the gate.

26) An anodized oxide layer has a thickness in the range of 30 nm to several micrometers.

27) The bond strength is also governed by the character of the oxide layer on its surface.

28) Zinc oxide layers can also be used on polycarbonate (PC) in outdoor applications.

%ad3%

29) The aluminium oxide layer can be built to greater thickness by the process of electrolytic anodising.

30) However, this oxide layer was not chromium metal or chrome plating as we know it.

31) The presence of cobalt makes the oxide layer easier to melt and dissolve in the molten glass.

32) In these, full-thickness oxide layers are formed on both the aluminum foil strips prior to assembly.

33) The growth of the oxide layer and subsequent Si deposition have been conducted under ultra-high vacuum conditions.

34) Massive lead forms a protective oxide layer , but finely powdered highly purified lead can ignite in air.

35) The oxide layer that forms then peels off, and this exposes the metal to further oxidation.

36) The silvery-white color of barium metal rapidly vanishes upon oxidation in air yielding a dark gray oxide layer .

37) The goal of oxidation is to grow a high quality, uniform oxide layer on a silicon substrate.

38) Copper can be sealed to glass without the oxide layer , but the resulting joint is less strong.

39) This prevents formation of a continuous protective oxide layer , which would stop the bulk oxidation of metal.

40) By reversing the charge of the voltage, the oxide layer is removed and the surface tension restored.